Hi If you want to enable 802.1q in one switch port via CLI for example for GigabitEthernet1/0/5:
interface GigabitEthernet1/0/5 switchport trunk encapsulation dot1q switchport trunk allowed vlan 2,800 { 2 and 800 are the VLANIDs included in this 802.1q link, vlan tag in L2} switchport mode trunk best regards! Ramsés Ríos ________________________________________ De: cisco-nsp-boun...@puck.nether.net [cisco-nsp-boun...@puck.nether.net] En nombre de Deric Kwok [deric.kwok2...@gmail.com] Enviado el: viernes, 12 de agosto de 2011 20:51 Para: Cisco Network Service Providers Asunto: [c-nsp] 802.1q , tag and untag Hi all How can I create the 802.1q vlan in cisco switch? How can I put the tag and untag on the port. ls it same as native vlan? Thank you so much _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/