Rolf wrote (in short): > switchport mode dot1q-tunnel > > When trying to set the above commands I get that error: > Gi4/48 doesn't support 802.1q tunneling. > My linecard is a WS-X6548-GE-TX, does that mean I cannot use QinQ here or > is there another way ? > Same config on a WS-X6724-SFP is accepted.
>>nobody an idea about this ? >>Cannot be i am the first one trying to run/built such setup or migrating >>from a platform that can do it. ;) See this link; http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/dot1qtnl.html " The WS-X6548-GE-TX, WS-X6548V-GE-TX, WS-X6148-GE-TX, and WS-X6148V-GE-TX switching modules do not support IEEE 802.1Q tunneling." /Stig _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/