Matthew said: >If it was made apparent, could you point to any public documentation that >states that? I've scoured Cisco's site, google, and mail archives, and can't >find any mention (other than specific caveats) that state that NDE and >hardware assisted nat are not supported on the same interface. In fact, it >took TAC almost two weeks of escalation before anyone would state it wasn't >supported and they couldn't find any documentation that stated that.
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/intro.html#wp1034472 and http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/intro.html#wp1031772 Quote: "Note the following information about hardware-assisted NAT: [...snip...] -When you configure NAT and NDE on an interface, the PFC3 sends all traffic in fragmented packets to the MSFC3 to be processed in software. (CSCdz51590)" When looking up this bugID, I get some foo about "contains proprietary information that cannot be disclosed at this time". /Stig _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/