Here's some good articles to read: http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_examp le09186a0080950834.shtml http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_examp le09186a00808d2b72.shtml http://www.nil.com/ipcorner/SmallSiteMultiHoming/ http://www.nil.si/ipcorner/RedundantMultiHoming/
Frank -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of jacob miller Sent: Monday, July 11, 2011 8:59 AM To: cisco-nsp@puck.nether.net Subject: [c-nsp] NAT over Two different providers Hi, Am having the following scenario which I need assistance in solving. I have two Internet service providers each of which has provided a /29 set of public IP addresses. I would like to use Link A (ISP A) as the main link and Link B (ISP B) as my back up. I would like to do this automatically such that users on the LAN do not detect that one link is down. My LAN is on Private IP address range is beign NATed on the ISP's. Regards, Jacob Miller _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/