RP1 is really slow compared to the RP2 but really fast against the Sup720, RSP720 or NPE-G2 A comparison against other RPs and actual benchmarks would be helpful.
Mack -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Mark Tinka Sent: Wednesday, August 31, 2011 9:41 PM To: cisco-nsp@puck.nether.net; Derick Winkworth Subject: Re: [c-nsp] (no subject) On Thursday, September 01, 2011 08:57:51 AM Derick Winkworth wrote: > Wow. Nevermind. I failed at basic math. Its ~4k per VPN route. > Still, that adds up quick. I think if you plan on using an ASR 1k as > a PE and you have over 250k > VPNv4 routes then you should go with an RP2 and 8GB of RAM just to be > safe.. RP1 takes a *long* time to load > 200k+ routes. We always go with RP2 for purchases, unless it's a fixed unit, e.g., the ASR1002. Always take the faster CPU, if you can. RP1 is really, really slow. Cheers, Mark. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/