SUP/RSP720 requires high speed fan controllers and high capacity power supplies, So check your existing configuration before perform the migration.
On Mon, Aug 29, 2011 at 7:32 AM, cisco group <bundaberg44...@gmail.com>wrote: > We have a 6513 in our network with 2x Catalyst 6000 Sup 2 engines > running in SSO (Active, Standby Hot). The supervisors are currently > in slot 1 and 2. > > We would like to replace the supervisors with 2x WS-SUP720-3B in SSO > mode. These sups are required to be inserted into slots 7 and 8. > > I have looked around on the cisco site and have found procedures for > upgrading IOS on redundant supervisors but am unable to find > procedures on upgrading supervisor engines themselves? > > Can anyone point me in the right direction? > > Thank You > > > Switch#show module > Mod Ports Card Type Model > Serial No. > --- ----- -------------------------------------- ------------------ > ----------- > 1 2 Catalyst 6000 supervisor 2 (Hot) WS-X6K-SUP2-2GE > 2 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE > > Switch#show vers > ....... > IOS (tm) c6sup2_rp Software (c6sup2_rp-JK9S-M), Version 12.2(18)SXD5, > RELEASE SOFTWARE (fc3) > ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1) > BOOTLDR: c6sup2_rp Software (c6sup2_rp-JK9S-M), Version 12.2(18)SXD5, > RELEASE SOFTWARE (fc3) > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Best Regards, Mounir Mohamed, CCIE No.19573 (R&S, SP) Senior Network Engineer, Core Team. NOOR Data Networks, SAE Mobile# +2-010-2345-956 http://mounirmohamed.wordpress.com http://www.linkedin.com/in/mounirmohamed _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/