Hey,
I've got two borders connected via ibgp, both receving full-view via
uplinks, and I notice one of borders receiving about 190K prefixes via
ibgp. But I'm clearly sure there no filters at all.
Configuration between borders are pretty simple and consist just two lines.
neighbor x.x.x.x remote-as 65536
neighbor x.x.x.x next-hop-self
Only difference is one border have configuration via address-family ipv4
while other doesn't have such sub-command, everything under router bgp.
Any ideas where should I look?
Thanks
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
