Hi all, Joe Marr wrote:
> Does anyone have experience in monitoring IPv6 BGP peering > via SNMP. I'm I don't know if this works with Cisco gear, but I think it's a standard MIB... Do a snmpwalk on BGP4-MIB::bgpPeerState. You will see an Entry for each BGP Peer (IPv4+IPv6) you have. But... The OID for the IPv6-Peers is notated as if it would be IPv4. =;-) So use the first (most left) 4 octets from the IPv6 address of the peer and note it decimal with points in between. This will give you the complete OID to ask for. Example: If the Peer is fe80:dad3:abcd::1 0xfe = 254 0x80 = 128 0xda = 218 0xd3 = 211 You have to ask for this OID BGP4-MIB::bgpPeerState.254.128.218.211 -- Greetz Thomas Voigt _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
