Hi there,
I'd like to ask how to configure the inter-as-te on XR
I've found that XR uses Path Computation Element rather than passive interface
flooding that is used in IOS
ASBR-1:
configure
mpls traffic-eng
interface pos 0/6/0/0
pce address ipv4 192.168.25.66 <-------- is this suppose to be ASBR-1
loopback ip please?
pce peer address ipv4 10.1.1.1 <-------- is this suppose to be remote AS
ASBR or local AS PE please?
pce keepalive 10
pce deadtimer 50
router id loopback 0
router ospf 1
router-id 192.168.25.66 <-------- is this suppose to be ASBR-1 loopback ip
please?
area 0
interface loopback 0
mpls traffic-eng router-id loopback 0
mpls traffic-eng area 0
rsvp
interface pos 0/6/0/0
bandwidth 100
commit
And the tunnel-te destination should be remote-as PE like in IOS right?
And the path option should use the "pce" keyword
Thank you very much
Adam Vitkovsky CCIP(r) CCNP(r) certified
System Engineer | AT&T Business Solutions - Global Customer Service
Phone: +421-269-257-375
Email: [email protected]<mailto:[email protected]>
"This message and any attachments to it contain confidential business
information intended solely for the recipients. If you have received this email
in error please do not forward or distribute it to anyone else, but email me to
report the error, and then delete this message from your system."
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
