> Can someone give me a hint about MPLS/VPN QoS mapping on an asr1001. > I have 4 that needs to enablet for QoS, and I'we been looking at some > reference guides. > I would like to make a "shot pipe" implementation with five classes. > Most all documentation have a mapping between the experimental and the cos > value. > Is there a reason for this ??,
reason could be that you've been looking at PFC QoS (or Catalyst QoS) documents which are based on the internal cos concept. This does not apply to the ASR1k (or most other "router" platforms). > isn't possible to use the DIFF-serv value > for the mapping between mlps and customer interface > We normally have 2 or 3 mpls interface per box and 2 CE interfaces. Please look at http://www.cisco.com/en/US/tech/tk436/tk428/technologies_tech_note09186a 008022ad7e.shtml#shortpipe, you should be able to use this config example when drafting your QoS for the ASR1k.. Not sure if you want to do any remarking on your P devices, if not, you can keep the P config much simpler than illustrated in the above URL oli _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
