On 11/22/2011 08:47 PM, Jeff Kell wrote:
On 11/22/2011 5:15 PM, Peter Rathlev wrote:
On Tue, 2011-11-22 at 12:59 -0700, Dave wrote:
I was wondering if anyone has used the 3560X-48T switches and would be
kind enough to give me the good/bad/ugly on them ?
We have a couple of WS-C3560X-48T-Ls in use. They seem to function just
as "well" as their 24 port cousins. Any specific things on your mind?
We have some C3560X-24Ts (with IP Services upgrades) in production as CE
routers. They work as "well" as the 3560s we had been using. We don't
have any under serious load, no QoS, and no 10G deployments, so no
horror stories yet. Some output drops on some uplinks but doesn't
"feel" as shallow as 3560 non-Xs.
They run 3560E images. No idea how much hardware they have in common.
Jeff
Jeff,
The output drops were one of the things I was concerned about. How far
below line rate were you seeing them ? We picked up some 2960s awhile
back and noticed that we started seeing drops at around 400mbps.
Does anyone know how many ports/asic on these switches and/or what the
available bandwidth to the backplane is per asic ?
Thanks
Dave
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
