Mark, > We've also been struck by an interesting one that Cisco > still can't figure out. Initial configuration contains the > 'name' option to the 'ip route' command. Log into the > switch, make a change, and the 'name' portion disappears. We > caught this on RANCID, showed it to Cisco, but they can't > reproduce it. It's still happening today, as we have tons of > these boxes. >
FWIW We've seen the same static route name behavior with 3560s running 12.2(50)SE. Occasionally the names disappear from the routes. You can re-apply the configuration from Rancid to put them back, and at some point later they disappear again. We didn't dig into it as it was only a minor annoyance for where we have 3560s deployed. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
