Found this via a quick search: http://www.cisco.com/en/US/docs/ios/12_4t/ip_mcast/configuration/guide/mctls plt.html
I was thinking about 2 distinct RP addresses, using spt-threshold infinity so it stays on the shared tree, and having the route to the RP preferred over one link. Hopefully the above is better than my quick thoughts. David -- http://dcp.dcptech.com -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of henrry huaman Sent: Monday, December 05, 2011 9:13 PM To: cisco-nsp@puck.nether.net Subject: [c-nsp] Multicast question Hi Guys, We have the next scenary: R1- e0/0---------------e0/0- R2 \ e0/1---------------e0/1--/ And, we want to have differents groups multicast passing by its own path. Is possible to configure any feature "PBR" with multicast? R1 e0/0 ------- only group 239.32.32.32-------- e0/0 R2 R1 e0/1 ------- only group 239.33.33.33--------e0/1 R2 Thanks. Henry _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/