Hi, > Alan and Mike-- > thanks, but that is the same stuff i've found. �I'm looking for the > Commands or ASDM steps to make it happen. �I found "client-update enable", > but is that the command? �It still updated the anyconnect client after i > removed it. �(ASA 8.4.2 and anyconnect 2.5.x)
the profile must have <AutoUpdate>false</AutoUpdate> in the ClientInitialization template - as per the doc i linked. this can be done under the ASDM ...cisco dont like you using the command line for anything these days...it'll end up in one of the XML blobs on disk alan _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/