Much appreciated Tony! - Assume that the "oam-pvc 0" is normal (based on http://www.cisco.com/en/US/tech/tk39/tk51/technologies_q_and_a_item09186a0080111154.shtml)
... vbr-nrt 2048 2048 256 tx-ring-limit 16 oam-pvc 0 encapsulation aal5snap vs ... vbr-nrt 2048 2048 256 tx-ring-limit 16 oam-pvc manage encapsulation aal5snap Cheers! Date: Mon, 30 Jan 2012 20:33:50 -0800 From: td_mi...@yahoo.com Subject: Re: [c-nsp] disabling ATM F5 OAM Loopback / Continuity cells To: johnellio...@hotmail.com; cisco-nsp@puck.nether.net John, Just "no oam-pvc manage" then to disable all OAM management. Have a look at this for other possible options: http://www.cisco.com/en/US/tech/tk39/tk48/technologies_configuration_example09186a0080094570.shtml#summary It would appear that by using "oam-pvc <0-600> configured without the manage keyword" you can stop it from taking any action on OAM received or not. regards,Tony. From: John Elliot <johnellio...@hotmail.com> To: td_mi...@yahoo.com; cisco-nsp <cisco-nsp@puck.nether.net> Sent: Tuesday, 31 January 2012 2:23 PM Subject: RE: [c-nsp] disabling ATM F5 OAM Loopback / Continuity cells Cheers Tony - I only have(i.e. no cc): (config-if-atm-vc)#no oam-pvc manage ? <0-600> OAM loopback frequency(seconds) keep-vc-up OAM loopback cells failure action <cr> Date: Mon, 30 Jan 2012 19:58:46 -0800 From: td_mi...@yahoo.com Subject: Re: [c-nsp] disabling ATM F5 OAM Loopback / Continuity cells To: johnellio...@hotmail.com; cisco-nsp@puck.nether.net Hi John, Try "no oam-pvc manage cc" under the PVC to stop sending of CC. regards,Tony. From: John Elliot <johnellio...@hotmail.com> To: cisco-nsp <cisco-nsp@puck.nether.net> Sent: Tuesday, 31 January 2012 1:49 PM Subject: [c-nsp] disabling ATM F5 OAM Loopback / Continuity cells Hi Guys - We have a number of atm pvcs to carrier (For client tails) and we have a small number that experience outages(weekly) - The carrier has been investigating for months, and they have requested we disable ATM F5 OAM Loopback / Continuity cells on the PVC's on our core(Apparently in some instances, there end is not responding to these OAM/CC and they think this may be the cause) I've looked this up, and have come across the following doc: http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/24soamcc.html but it doesnt really state how to stop(disable) our atm pvc from sending the OAM/CC ? Platform is 7200 Cheers _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
