Except the global configuration commands are such as 'qos' are not available. 'show qos' is also not available :(
Mack -----Original Message----- From: Asbjorn Hojmark [mailto:li...@hojmark.org] Sent: Thursday, February 02, 2012 8:16 AM To: Mack McBride Cc: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] QOS for 4948E - 15.0(2)SG3 code The 4948E is basically a fixed-configuration Catalyst 4500 with a Supervisor 6 in a small box, so you can use the 4500 configuration guide. -A Sent from my tablet; excuse brevity On 01/02/2012, at 16.04, Mack McBride <mack.mcbr...@viawest.com> wrote: > Does anyone have documentation on QOS for the 4948E running 15.0(2)SG3 code? > It is significantly different from 12.2(54)SG3. > Cisco does not yet have a configuration guide on-line or at least not > under the 4900 switches :( > > LR Mack McBride > Network Architect > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/