Take a look into importing routes from one vrf into another using an import map.
check out a previous thread: http://puck.nether.net/pipermail/cisco-nsp/2005-November/025500.html https://supportforums.cisco.com/thread/2097252 Mike On Fri, Feb 3, 2012 at 9:00 AM, Covalciuc Piotr <pkovalc...@gmail.com>wrote: > Hello, > > I've created multiple VRFs on Cisco 4510. I need to configure the routing > between VRFs. Cisco recommends using BGP and 'route-target import/export'. > > But, my IOS version don't support BGP. > > Is it possible to configure the inter-VRF routing using static routes? Or > maybe there are others solutions? > > Thank you, > Peter > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/