Hello group, In order to support the new 2232PP FETs, I will need to upgrade a pair of 7010 running 5.1.3.
I'm reading the 5.2 release notes and the only important issue I see is the OTV configuration that needs to be changed. The OTV Site Identifier is now mandatory. I also found that is now mandatory to configure the default CoPP policy: ********** Apply the default CoPP policy. Example: switch(config)# copp profile strict Upgrade to Cisco NX-OS 5.2(1) and later requires configuring the default CoPP policy. ********** I have a pair of 7010 but just one is configured for OTV and also I only have one RP in each box so I don't have ISSU support. I'm looking for any caveats and limitations that you may have experienced. I will upgrade to the recommended release 5.2.3a. Thanks. Regards, Antonio Soares, CCIE #18473 (R&S/SP) [email protected] http://www.ccie18473.net _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
