MDT didn't come around till later. Upgrade the code to a 124T release for MDT support. Need MDT support for SSM support of the Data groups, otherwise you don't need MDT. But, then you are stuck with ASM or the default group only.
David -- http://dcp.dcptech.com -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Henry Huaman Sent: Thursday, February 23, 2012 12:48 AM To: cisco-nsp@puck.nether.net Subject: [c-nsp] mVPN with 2811PE Importance: High Hi, Currently we are testing mVPN with 2811 (ios 124-25b) like PE. And we see these issues: - The configuration don´t have address-family ipv4 mdt command. - The 2811 don´t response to ping (group multicast) ( 2811 with igmp join) - We don´t see the interface Tunnel associate with the VRF (2811#show ip vrf interface VRF) Is valid this behavior? Or maybe we could to change this version? Thx Henry _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/