Hi Folks, In my recently project, we buy the L3VPN license for the ASR9K, today, i try to install them to the machine, but i cannot check whether it works or not. The key procedure is : copy tftp://192.168.0.229/FOX1436GR1Q_20110117042020633.lic disk0:/license location 0/RSP0/CPU0 copy tftp://192.168.0.229/FOX1436GR1Q_20110117042020633.lic disk0:/license location 0/RSP1/CPU0 license add disk0:/license/FOX1436GR1Q_20110117042020633.lic license A9K-AIP-LIC-B location 0/3/CPU0 commit
Then i show the license in the admin mode as bellow: RP/0/RSP0/CPU0:ASRPE1(admin)#show license FeatureID: A9K-AIP-LIC-B (Slot based, Permanent) Total licenses 1 Available for use 1 Allocated to location 0 Active 0 Store name Permanent Store index 1 Pool: Owner Total licenses in pool: 1 Status: Available 1 Operational: 0 I am wondering if there should be active or not. Note: I didn't configure anything in that line card, also if i don't install this license, i also can configure the L3VPN. Thanks and Regards, Hu Xu _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/