Just resurrecting an old thread. Anybody have any new information on "Per-user QoS policies via RADIUS" on 15.1? I have a 1941 running 15.1(4)M1 that I'd like to accept the above, but am unable to figure out the secret combo.
Thanks, -c On Mon, Mar 8, 2010 at 3:00 AM, Reuben Farrelly <[email protected]> wrote: > What version of IOS code are you running? > > Just in case this apples to you, note that the feature "Per-user QoS > policies applied via RADIUS" is broken in all versions of IOS 15.0, and as > far as I can tell, many versions of 12.4T including 12.4(15)Tx and possibly > earlier, on multiple platforms. Apparently the code is "broken" on the 7200 > and "the feature is not present" on the ISRs. I reported this bug to TAC > and tested on both 7200 and ISR (2851) platforms. > > 12.4M works OK on both platforms so you might want to try out 12.4(25)c on > either platform, where the code "exists" and "works". > > See CSCte95297 for the gory details. > > Reuben > > > > [email protected] wrote: >> >> Hi, >> >> Have DSL users terminating on LNS(7204) via Eth, with radius auth - >> Trying to apply the following service policy(Configured on LNS) upon >> successful auth: >> >> policy-map JF-2MB-ADSL >> class class-default >> shape average 1850000 > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
