On Fri, Apr 13, 2012 at 10:13:28, Brian Morgan wrote: > Cc: [email protected] > Subject: Re: [c-nsp] NAT on Cisco ASA > > On Thu, Apr 12, 2012 at 12:49 PM, Covalciuc Piotr > <[email protected]> > wrote: > > I know, the servers can communicate through local network (10.10.10.x). > > I'd like just to know if the communication between local servers can > > be established through NATed IP. > > If so, how it should be configured on ASA? > > > Good day Peter, > It is possible for this to work by using a technique called hair > pinning, the problem is that you may start getting strange behavior > with your inside network. > This feature was originally intended to allow vpn clients to > communicate to each other, but can be abused to perform the NATing that you > need. > Cisco has released a nice video tutorial on how to do this > http://www.youtube.com/watch?v=wjEfdfI0BqY and we have used this > technique in labs, but try not to use it for production networks. >
Ah.. I've done this for outside to outside traffic during a move before, didn't think about applying to the internal segments though, but same setup. -ryan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
