Correct - doesn't even link with auto/auto. Can only get it to link at 100.
I am armed with new cabling and try to rule out the physical. Nothing in the init process that is indicating any bad phy or anything of the sort - I am hoping it's not a bad switch. Thanks for all the replies. -graham On 4/16/12 5:50 AM, "Keegan Holley" <[email protected]> wrote: > I agree with that. If it doesn't link at all with auto auto then the link > pulse frames that control speed negotiation are some how hindered. Since you > have three different devices exhibiting the same behavior on newer code I > would even skip to the switch being bad. > > Sent from my iPhone > > On Apr 16, 2012, at 3:55 AM, John van Oppen <[email protected]> wrote: > >> Are you saying that the link does not come up with both ends in auto/auto? >> At least on copper, that would indicate to me that you either have a bad >> switch or bad cabling... Are you sure the unit you have is good? I am >> plugged into a 3550-12T here at home with a few machines and auto works fine >> with every nic I have tried. >> >> >> John >> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
