I'm trying to set up Radius/PPPoE on a router and having a problem with the connection constantly reauthenticating. The config is substantially similar to others I have that do work correctly. Even stranger is that PPPoA is working fine. This is what I've got for the relevant sections:
aaa new-model ! aaa authentication login default line aaa authentication login console none aaa authentication ppp dsl group radius aaa authorization network dsl group radius aaa accounting delay-start aaa accounting delay-start all aaa accounting network dsl start-stop group radius ! bba-group pppoe global virtual-template 1 vc-class atm ppp encapsulation aal5autoppp Virtual-Template1 ! interface ATM1/0.1 multipoint no ip mroute-cache class-int ppp pvc 1/465 ! pvc 1/740 ! pvc 1/753 ! pvc 1/1000 interface Virtual-Template1 mtu 1492 ip unnumbered Loopback0 no logging event link-status peer default ip address pool ppp ppp authentication pap chap dsl ppp authorization dsl ppp link reorders ppp multilink ppp multilink fragment disable ! radius-server attribute nas-port format d radius-server host 216.51.246.12 auth-port 1812 acct-port 1813 radius-server timeout 10 radius-server key 7 14101D0C03143A3B2B29 radius-server vsa send accounting ! I've used debugging on the AAA, radius, and PPPoE subsystems and didn't see any smoking guns. Thanks Dave _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
