Hi All, We're trying to get some new 3560-CG's to auth with our MS 2k8 NPS server but are hitting some roadblocks. Has anyone successfully had them talk to each other?
We get stuck on EAP types - the server complains that the EAP type is invalid. On the supplicant switch side I've tried all available EAP methods (FAST, GTC, MD5, MS-CHAPv2) and same on the Windows side. Our authenticator and supplicant switches both have cisp enable, and these configs: supplicant (tried with and without dot1x supplicant eat): interface GigabitEthernet0/10 switchport trunk encapsulation dot1q switchport mode trunk dot1x pae supplicant dot1x credentials supp dot1x supplicant eap profile eap end authenticator (tried with switchport mode access and mode trunk, and with authentication open): interface FastEthernet0/1 switchport trunk encapsulation dot1q switchport trunk allowed vlan 40,72,88,144,222,300 switchport mode access authentication port-control auto dot1x pae authenticator end Is there anything we're missing? Anyone got any tips? Cheers, James _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
