On 5/9/12 4:28 AM, Darren O'Connor wrote: > Hi all. > > I'm trying to find a possible way to run dot1q tags over serial and/or > dsl interfaces. I could trunk over E1's on my old Riverstone kit without > a problem, but I can't find a way to do it with a Cisco box.
For serial interfaces you can run frame-relay encapsulation and map VLANs to PVCs. For DSL, if you control the DSLAM you can do something similar mapping VLANs to ATM VP/VCs. Other solutions include tunneling, pseudowire, etc. -- Jay Hennigan - CCIE #7880 - Network Engineering - j...@impulse.net Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/