That is correct, a 10gig interface will report as 10gig..... Andrew Jones Alphawest
-----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Mal Sent: Monday, 7 May 2012 5:00 PM To: cisco-nsp@puck.nether.net Subject: [c-nsp] CAB-SFP-50CM & 2960S Anyone successfully using CAB-SFP-50CM between 2960S switches (WS-C2960S-48LPD-L) ? I have a link up between two 10G 2960S SFP+ port interfaces (and can ping across it) but its reporting a "10Gig" speed connection via the cab-stack-50 SFP cable.. Switch# sho inventory NAME: "1", DESCR: "WS-C2960S-48LPD-L" PID: WS-C2960S-48LPD-L , VID: V02 , SN: xx NAME: "TenGigabitEthernet1/0/1", DESCR: "SFP-10GBase-CX1" PID: CAB-SFP-50CM , VID: V01 , SN: xx Mal _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/