I've read a bunch of docs on configuring an IOS DHCP relay to impose option 82 bits, but only when it's acting as a relay, not when it's acting as a server. Is this possible?
ie: ! ip dhcp database tftp://192.168.66.162/lease write-delay 60 ! ip dhcp pool test network 10.0.0.0 255.255.255.240 default-router 10.0.0.1 dns-server 8.8.8.8 8.8.4.4 ! interface vlan 100 ip dhcp relay information option-insert ip address 10.0.0.1 255.255.255.240 ! interface GigabitEthernet0/16 switchport mode access switchport access vlan 100 ip dhcp limit lease 1 ip dhcp relay information option-insert ! When I query the lease database, I don't see any of the interface specific info I'd expect to see (vlan 100 and/or Gi0/16). Is this doable or only in DHCP relay mode? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
