You might be able to make that work in the lab, at least with 'switch trunk allow' so that you don't bridge between the internal interfaces, and if you make sure that you didn't have overlapping VLAN numbers to extend.
But I wouldn't consider it best practice. The OTV VDC needs a site VLAN, which would exist on one of the L2 interfaces, but not both, thus making OTV functionality for one 'client' VDC dependent on the life of the other. Not really where I'd want to go. If you used a separate physical interface for the site VLAN, it would make slightly more sense, but you'd still want to be careful with which interfaces were allowed on the insite, and not to overlap them in the overlay... and it's not likely to be solution tested and supported from Cisco, I would think, which means that you should do a lot more testing yourself. -A -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Antonio Soares Sent: 14. maj 2012 12:15 To: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] OTV on-a-stick Guys, any comments to this OTV on-a-stick question ? Thanks. Regards, Antonio Soares, CCIE #18473 (R&S/SP) amsoa...@netcabo.pt http://www.ccie18473.net -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Antonio Soares Sent: quinta-feira, 10 de Maio de 2012 19:09 To: cisco-nsp@puck.nether.net Subject: [c-nsp] OTV on-a-stick Hello group, Anyone knows if having more than one Routing VDC is a supported deployment ? Basically I want OTV on-a-stick like we have bellow but I want another VDC to make use of the OTV VDC: http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/DCI/whitepa per/DCI_1.html#wp1215970 So I would need to create a second Internal Interface connected to the new Routing VDC and use the existing Join Interface connected to the already in place Routing VDC. Does it work ? In terms of configuration, it should be something like this: interface Overlay0 otv join-interface ethernet1/1 interface Ethernet1/1 description Layer-3-to-Routing-VDC-1 (join interface) interface Ethernet1/2 description Layer2-to-Routing-VDC-1 (internal interface) switchport interface Ethernet1/3 description Layer2-to-Routing-VDC-2 (internal interface) switchport Thanks. Regards, Antonio Soares, CCIE #18473 (R&S/SP) amsoa...@netcabo.pt http://www.ccie18473.net _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/