On Tue, May 15, 2012 at 14:08:17, Joseph Mays wrote: > Subject: Re: [c-nsp] Call rejeciton from Cisco > > On a related note, I am aware that part of the problem might be that > the called party number might be listed as plan unknown and type > unknown. I've been trying to figure out a way on the IAD 2400 to set > this to national and isdn for all outgoing calls, but the only way I > can find to do that is with translation rules, and those all seem to > assume that the first thing you want to do is search and replace part > of the dialed number. I really don't care what the dialed number is. > Is there some way to match just on the plan and type, or some way to set > those values other than a translation rule?
You can try this: voice translation-rule 100 rule 1 /^\(.*\)/ /\1/ type any national plan any isdn ! voice translation-profile outbound-set translate called 100 Then put that on your POTS dial-peer outbound. -ryan _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/