Reset/reload of N5K is very fast right? Regards, Alexander Lim
On May 25, 2012, at 5:21 AM, Asbjorn Hojmark - Lists <li...@hojmark.org> wrote: > On Thu, 24 May 2012 20:30:40 +0000, you wrote: > >> I'm wondering if anyone has any experience/tips/advice when running >> Fibre Channel on the Nexus 5548UP platform. > > Yeah, we have customers doing that and do that ourselves. > >> I've done a little bit of research, and understand that the FC ports >> have to start at the back end of the chassis, and that to switch a >> port from Ethernet mode over to FC mode, you need to reload the whole >> switch. > > Yeah, currently the ports have to be contiguous, and with FC at the > high end. If you use a module, you don't have to reload the whole > switch when changing the configuration. You can just reset the module. > When running FCoE, you don't have to reset/reload anything. > > To me, FC and FCoE on the N5000s is pretty mature and absolutely > production ready. > > -A > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/