Have you tried other code to try to rule out a 15S bug? Maybe SRE latest?
On May 31, 2012, at 9:33 AM, Jason Lixfeld <[email protected]> wrote: > > On 2012-05-31, at 9:02 AM, Phil Mayers wrote: > >> On 31/05/12 13:56, Jason Lixfeld wrote: >> >>> I've run: >>> >>> 'diagnostic start module<1-9> test all' to test all the modules. >>> All seem to have passed. Not sure if there are other diags to run. >> >> At one point, those commands ran a sub-set of the diags; not sure if that's >> changed in recent versions, but a full diag suite is (highly) disruptive to >> traffic and (very) slow, so if you didn't see an outage, you haven't run >> them all. > > It shut the linecards down, so I'm pretty sure it did what it was supposed to > :) > > This box is isolated, so the tests being disruptive are a non-issue. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
