Hi Folks, My GSR have two PRP2, each PRP has three management interface which can be configured IP address. But the thing is through show ip interface brief, i just can see three Ethernet interface, cannot see six Ethernet. Now my issue is if i configure the E0 interface as ip address 192.168.1.1/24, when the active PRP down, will the configuration change to the standby PRP?
Will appreciate for any reply. Best Regards, Hu Xu _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
