On Wed, Jun 6, 2012 at 1:43 PM, Klaus Kastens <k...@netuse.de> wrote: > Hi John, > >> I've run into a problem that I can't figure out. We have a BVI >> configured with several ports in the bridge domain.If I know the MAC >> address of a device, how do I find which layer two port it is >> connected to? In IOS I would simply do 'show mac-address-table" and >> look for it. I can find no similar command in XR. The output of "show > > In IOS you could also try "show bridge H.H.H" > > Is this related to VPLS? > There is "show l2vpn forwarding bridge-domain mac-address" in IOS XR.
Thanks, that was it. These are just L2 ports in a "vlan" on a CRS. Not very complicated, but I'm not used to trying to troubleshoot that type of thing in IOS XR. Thanks again, John _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/