I didn't have time to check. Going to bring it down again tonight and run more tests. Also thinking i might default the router config and build it back up piece by piece to see if i can find the issue.

On 6/13/2012 4:22 PM, Chuck Church wrote:
Probably not a single reference.  Have you verified on the outside world
that your prefixes are seen?  If you haven't, what are they, most people on
this list can verify.  Obviously you'd have to do that while running 15.1...

Chuck


-----Original Message-----
From: Chris Gotstein [mailto:ch...@uplogon.com]
Sent: Wednesday, June 13, 2012 5:16 PM
To: Chuck Church
Cc: 'cisco-nsp'
Subject: Re: [c-nsp] 7204VXR NPE G1 Upgrade from 12.4 to 15.1M Issues

Prefix-lists remained the same.  Verified that.

Is there a list somewhere of the default commands for 12.4 and 15.1M?

On 6/13/2012 4:10 PM, Chuck Church wrote:
Did you confirm that the prefixes you were sending via BGP under 12.4
didn't disappear when running 15.1?  Are your peers still accepting
them?  It's possible a default changed that is affecting your
advertisement.

Chuck

-----Original Message-----
From: cisco-nsp-boun...@puck.nether.net
[mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Chris Gotstein
Sent: Wednesday, June 13, 2012 4:35 PM
To: cisco-nsp
Subject: [c-nsp] 7204VXR NPE G1 Upgrade from 12.4 to 15.1M Issues

I have a 7204VXR with NPE-G1 that is running 12.4.25f Advanced Services.
This router is acting as our main connection to the internet running
full BGP routing connected to 2 providers via ethernet.  I'm wanting
to upgrade to 15.1M Advanced Services w/ LI.  After loading the router
with IOS 15.1M, the router comes up correctly, all BGP sessions come
up correctly and the routing table looks correct.  I can ping the outside
world from the router.
When i try to access the internet from another station, all traffic
dies at this router.  I can ping all interfaces on the router from any
workstation.
I have sanitized configs for those that would like to see them.  This
is a pretty basic setup, not doing anything fancy.  Soon as I load
12.4 back on the router and reload, everything comes back up just fine.
Any thoughts?

--
---- ---- ---- ----
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com

_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


--
---- ---- ---- ----
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com



--
---- ---- ---- ----
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com


_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to