So you mean this is not for the OSPFv3 support between PE and CE under VRF(The interface towards CE belong to one VRF in PE router)?
2012/6/22 adam vitkovsky <adam.vitkov...@swan.sk> > This would be used when the datacenter router RIB is divided into > accounting VRF and sales VRF –each running OSPF and the router needs to be > able to route between these two VRFs**** > > ** ** > > adam**** > > *From:* Xu Hu [mailto:jstuxuhu0...@gmail.com] > *Sent:* Friday, June 22, 2012 3:15 PM > > *To:* adam vitkovsky > *Cc:* cisco-nsp@puck.nether.net > *Subject:* Re: [c-nsp] OSPFv3 support for IOS and IOS-XR**** > > ** ** > > For this OSPFv3 VRF-Lite/PE-CE, is support the ospfv3 between PE and CE > under vrf.**** > > Don't quiet understand what you mean.**** > > 2012/6/22 adam vitkovsky <adam.vitkov...@swan.sk>**** > > OSPFv3 VRF-Lite/PE-CE**** > > **** > > adam**** > > **** > > *From:* Xu Hu [mailto:jstuxuhu0...@gmail.com] > *Sent:* Friday, June 22, 2012 11:52 AM > *To:* adam vitkovsky > *Cc:* cisco-nsp@puck.nether.net > *Subject:* Re: [c-nsp] OSPFv3 support for IOS and IOS-XR**** > > **** > > which one means you can disable the pe specific check for down-bit?**** > > 2012/6/22 adam vitkovsky <adam.vitkov...@swan.sk>**** > > It's basically saying you can disable the PE specific check for down-bit > In other words it supports the cmd: capability vrf-lite > It's the same cmd in IOs and IOS-XR > > adam**** > > -----Original Message----- > From: cisco-nsp-boun...@puck.nether.net > [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Xu Hu > Sent: Friday, June 22, 2012 6:10 AM > To: cisco-nsp@puck.nether.net > Subject: [c-nsp] OSPFv3 support for IOS and IOS-XR > > Hi Folks, > > Recently we are checking the OSPFv3 VRF support for IOS and IOS-XR. > Through the Cisco Feature Navigator, i found two related, one is MPLS VPN > OSPFv3 PE-CE, another one is OSPFv3 VRF-Lite/PE-CE, i don't know whether > this two are the same or not. > My understanding is that OSPFv3 VRF-Lite/PE-CE is for IOS, i.e, for the > 7600. > Then the MPLS VPN OSPFv3 PE-CE is for IOS-XR, i.e, for the GSR, CRS, > ASR9000. > > Will appreciate for any comments. > > Thanks & Best Regards, > Hu Xu**** > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/**** > > **** > > ** ** > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/