And guess what the Infoblox appliances run? :) Josh
On Mon, Jun 25, 2012 at 10:39 AM, Scott Keoseyan <[email protected]>wrote: > I am with you on the Linux approach but for some of my clients I have had > good luck with Infoblox appliances as well, especially in enterprise > network scenarios, serving both DNS and NTP... > > Anyone else use these? > > --Scott > > On Jun 23, 2012, at 6:38 PM, Nick Hilliard wrote: > > > On 23/06/2012 22:12, Mack McBride wrote: > >> It doesn't take much know how to run a linux server for ntp. > > > > "much" is a relative thing. If running linux isn't your forte, then > > debugging peculiar problems with linux is going to look like rocket > science. > > > > Again, without knowing anything more about this situation, it sounds to > me > > like an appliance + support contract would be the best option for this > > particular application. This isn't because you couldn't get linux > > experience relatively easily, but more because if this were the only > linux > > box in a sea of windows servers, there would be a relatively high > internal > > support cost: almost certainly higher than the capex depreciation + > support > > costs of an appliance. > > > > I'd run the free unix option, but that's me - I'm sure you'd do the same. > > > > Nick > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
