... but the serial interface is stuck in "reset" status.
I should point out, that even with the controller turned down, clearing the
interface does not take it out of "reset" status.
ArmoryPl-AS5400#clear int Serial1/0:26:0
ArmoryPl-AS5400#show int Serial1/0:26:0
Serial1/0:26:0 is reset, line protocol is down
Hardware is DSX1
Description: Glass Doctor (K1.HCFU.417839..SC)
MTU 1500 bytes, BW 1280 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
