Marc, Perhaps it was right on the limit of max receive threshold and they repaired a splice that was dodgy to start with increasing the signal.
Patrick Tue, Aug 21, 2012 at 11:13:48AM +0100, marc williams wrote: > 10 GIG cisco compatible SFP in a 3750-X switch. > we started to see this error message after a fibre break and repair: > > %SFF8472-5-THRESHOLD_VIOLATION: Te4/1/2: Tx power high alarm; > Operating value: 0.6 dBm, Threshold value: 0.0 dBm > > Cant see how the TX power can go high? any ideas? Interface is up and > working ok. > > -- > Marc > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
