Just checked the flex links basic concept, is this technology same as Juniper RTG?
2012/8/24 Ryan West <rw...@zyedge.com> > On Fri, Aug 24, 2012 at 06:40:07, Xu Hu wrote: > > Subject: Re: [c-nsp] Port channel > > > > What is the flex links about? > > Because the traffic load-balance or not is depend on your settings, by > > default is source mac address, let's say if you just have one source > > then the traffic will just use one port-channel link, if you have two > > sources, then should be load-balance between the two members. > > Correct me if I have the wrong understanding of hashing algorithm. > > > > The default hashing algorithm is different on some platforms in the > Catalyst line. In the Nexus line, the default is different for a layer 3 > port channel vs a layer 2. Flex Links disable STP and one interface or > Portchannel acts as a backup. > > > http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/flexlink.html > > -ryan > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/