Hi list, I'm having and annoying problem with this configuration: Cisco 7609S using sup RSP720 1G Cisco IOS 12.2(33) SRE6 and NAM WS-SVC-NAM-2-250S
Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX ------------- 4 8 Network Analysis Module WS-SVC-NAM-2-250S ------------- 5 2 Route Switch Processor 720 (Active) RSP720-3CXL-GE ------------- 6 2 Route Switch Processor 720 (Cold) RSP720-3CXL-GE ------------- 8 24 CEF720 24 port 1000mb SFP WS-X6724-SFP ------------- Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 1 ----- to ---- 4.2 12.2(18r)S1 12.2(33)SRE6 Ok 4 ----- to ---- 2.0 7.2(1) 5.0(1) Ok 5 ----- to ---- 5.13 12.2(33r)SRE 12.2(33)SRE6 Ok 6 ----- to ---- 5.13 12.2(33r)SRE 12.2(33)SRE6 Ok 8 ----- to ---- 5.0 12.2(18r)S1 12.2(33)SRE6 Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 1 Distributed Forwarding Card WS-F6700-DFC3CXL --- 1.7 Ok 5 Policy Feature Card 3 7600-PFC3CXL --- 1.1 Ok 5 C7600 MSFC4 Daughterboard 7600-MSFC4 --- 5.0 Ok 6 Policy Feature Card 3 7600-PFC3CXL --- 1.1 Ok 6 C7600 MSFC4 Daughterboard 7600-MSFC4 --- 5.0 Ok 8 Distributed Forwarding Card WS-F6700-DFC3CXL --- 1.7 Ok Two Cisco 7609S, everything is ok but a mac conflict with the two management ports of the NAM WS-SVC-NAM-2-250 in slot 4, they are on the same Layer 2 subnet, the problem is only with the two NAM management port, I have restored to factory default de NAM IP configuration but in some way the they preserve the same mac address on the management ports and as a result I have network connectivity issues with the NAM, the question is if exists any procedure to reset the mac address in the NAM, or this mac is saved in the RSP720 supervisor, if is the case how two different equipment can have the same mac address, to increase the problem the mac is not in the NAM Mac range on 7609 range. Is there any way of resetting this??? I will appreciate your help. Best regards, Aliet _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/