Anyone using BVIs and l2vpn on IOS XR for routing interfaces? I am running into some strange issue in an attempt to put 4 ASR9k's into production on my network, but only on ipv4. I am having no issues with Ipv6 and OSPFv3, yet..The last reference I can find to BVI in a IOS XR 4.0.1 and it says, that a lot of features are not supported including IPv6. I went through the release notes up to 4.2.1 and the only reference is the support of ACL's on BVI. Yet, in troubleshooting I am unable to get ipv4 ACLs to work when applied to either the BVI interface or the l2transport interface.
http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.0/interfaces/configuration/guide/hc40irb.html Makes me want to just avoid them all together, but to implement card redundancy in our current configuration the BVI is needed. Thanks. -- Natambu Obleton, CISSP CCNA Senior Network Engineer FastTrack Communications, Inc. 970.828.1009 _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
