Take a look at this http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00809d16f0.shtml
This is almost always due to route churn. Take a look at your routing table (global and/or VRF) for routes that recently updated (show ip route | i 0:00) and that might give you some clues as to where the churn is coming from. -Pete On Tue, Oct 2, 2012 at 6:00 PM, CiscoNSP_list CiscoNSP_list <cisconsp_l...@hotmail.com> wrote: > > > > > Hi Guys, High cpu from BGP router process started ~48 hours ago - Happens > every 30 seconds (Cisco 7200, NPE-G2...."normal" load is 45->50% cpu) #sh > processes cpu sorted > CPU utilization for five seconds: 86%/44%; one minute: 53%; five minutes: 50% > PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process > 289 20754676 99918606 207 35.12% 6.76% 5.68% 0 BGP Router > All peering sessions on the 7200 have uptime of years(Or many weeks), > but I think it has to be due to a re-convergence? Have the following > configured under "address-family vpnv4" (This conf has always been on the > 7200(years))...but the 30 second scan time matches the CPU spikes. bgp > scan-time import 10 > bgp scan-time 30 Any suggestions on how to track down the cause? Cheers. > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/