I am trying to verify if the 7600-ES+20G3CXL and 7600-ES+40G3CXL are supported in the 6509E w/ Sup720 3BXL
I have spent the better part of a day going in circles on Cisco website. The 7600 ES+ Doc says there supported in the 6500 and references a document that only list the ES+20/ES+40 Linecards with 10G interfaces supported. We looking to use the 1G interfaces and not the 10G This is the 7600 Cisco Doc http://www.cisco.com/en/US/prod/collateral/routers/ps368/data_sheet_c78-49152.html This is the 6500 Cisco Doc it references http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/data_sheet_c78-643759.html I hoping there doc is just out of date. Thanks Erik ________________________________ CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error please notify the sender immediately by replying to this e-mail. You must destroy the original transmission and its attachments without reading or saving in any manner. Thank you. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
