Hi Mohammad,
In Feature navigator use the "Search by Feature" tab and filter by the
string "OSPFv3 VRF-Lite/PE-CE" (without the quotes). That will lead you
to the IOS version of this feature rather than XR.
Regards,
Paul
On 10/18/2012 02:48 AM, Mohammad Khalil wrote:
Thanks Paul
The issue is when I used the Cisco feature navigator , I only found IOS
XR for the mentioned keyword below (OSPFv3)
BR,
Mohammad
> Date: Wed, 17 Oct 2012 21:44:04 -0500
> From: p...@lituya.com
> To: eng_m...@hotmail.com
> CC: cisco-nsp@puck.nether.net
> Subject: Re: [c-nsp] IPv6 PE-CE
>
> OSPFv3 PE-CE is supported starting with IOS 15.2(2)S. The feature name
> is "OSPFv3 VRF-Lite/PE-CE".
>
> Note that you need to use the new form of the OSPFv3 CLI. For example:
>
> interface f0/0
> vrf forwarding red
> ipv6 address 2001:db8:1::1/64
> ospfv3 1 ipv6 area 0
>
> interface f1/0
> vrf forwarding blue
> ipv6 address 2001:db8:2::1/64
> ospfv3 1 ipv6 area 1
>
> router ospfv3 1
> router-id 1.1.1.1
> !
> address-family ipv6 vrf red
> redistribute bgp 65000
> exit-address-family
> !
> address-family ipv6 vrf blue
> redistribute bgp 65000
> exit-address-family
>
> Also "show ospfv3 vrf red ..." etc.
>
> Regards,
> Paul
>
>
> On 10/17/2012 09:11 AM, Mohammad Khalil wrote:
> >
> > Hi all,
> > I was trying to implement OSPFv3 and EIGRP6 as the PE-CE in 6VPE
deployment but seems IOS does not support that yet
> > Was there any updates in regards?
> >
> > Thanks
> >
> > _______________________________________________
> > cisco-nsp mailing list cisco-nsp@puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
