BFD is not supported in dynamips last I looked. -Blake
On Tue, Nov 6, 2012 at 9:50 AM, Adam Vitkovsky <adam.vitkov...@swan.sk>wrote: > I came to conclusion that bfd doesn't work in dynamips it will always crash > > > adam > -----Original Message----- > From: cisco-nsp-boun...@puck.nether.net > [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of M K > Sent: Tuesday, November 06, 2012 2:43 PM > To: cisco-nsp@puck.nether.net > Subject: [c-nsp] Cisco BFD > > > Hi allI was trying to configure BFD with OSPF > > I have the below configuration R1#sh run int f0/0.519Building > configuration... > Current configuration : 112 bytes!interface FastEthernet0/0.519 > encapsulation dot1Q 519 ip address 20.5.19.19 255.255.255.0 ip ospf bfdend > R5#sh run int f0/0.519Building configuration... > Current configuration : 111 bytes!interface FastEthernet0/0.519 > encapsulation dot1Q 519 ip address 20.5.19.5 255.255.255.0 ip ospf bfdend > R5#sh ip ospf neighbor | inc 51919.19.19.19 1 FULL/DR > 00:00:39 20.5.19.19 FastEthernet0/0.519 > I have no bfd neighbors > R5#sh bfd neighbors R5# > As well , am using GNS3 , when i tried to modify the BFD timers , The > routers stuck with no responseinterface FastEthernet0/0.519ip ospf bfdbfd > interval 250 min_rx 250 multiplier 3 > Any ideas?Thanks > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
