Thanks everyone for the suggestions. I've gone ahead and created some
policy-maps on the 3600X that will set the correct qos-group and
imposition exp values so that I'm able to preserve the original CoS
markings in both directions.
Jose
On 11/6/2012 4:39 PM, Pshem Kowalczyk wrote:
Hi,
On 7 November 2012 09:47, Lobo <loboti...@gmail.com
<mailto:loboti...@gmail.com>> wrote:
I was under the impression that the "rewrite ingress tag pop 1
symmetric" was required in order for the xconnect to work?
Removing it seems to break the xconnect as traffic no longer goes
across it.
It's required if the other end doesn't use service-instance-like setup
(with flexible matching of tags). 65xx automatically strips the VLAN
tag when it sees encapsulation command, 3600x does not.
So is MQC with qos-groups is the only way to preserve the markings
with this platform?
That's my understanding. On the upside - the same setup should work on
65xx as well.
kind regards
Pshem
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/