Hi, Just an idea, but have you tried "vtp pruning" in the config? If it is a bug then maybe it's a result of not clearing VLANs which were previously present but have been removed or re-numbered. Perhaps they are stuck in the VTP DB/cache pending a reload or similar event.
I know you are in transparent mode, but interestingly we have some 2960G units which show pruning as 'enabled' even though VTP is off globally: #sh run | inc vtp vtp mode off #sh vtp stat VTP Version capable : 1 to 3 VTP version running : 3 VTP Domain Name : VTP Pruning Mode : Enabled VTP Traps Generation : Disabled Device ID : x.x.x Feature VLAN: -------------- VTP Operating Mode : Off Number of existing VLANs : 42 Number of existing extended VLANs : 0 Maximum VLANs supported locally : 255 Ours are running 15.0(2) Maybe you can also check: sh vlan br | count act sh vlan | count enet Just out of curiosity, cheers! Robert Williams Backline / Operations Team Custodian DataCentre tel: +44 (0)1622 230382 email: rob...@custodiandc.com http://www.custodiandc.com/disclaimer.txt -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of CiscoNSP_list CiscoNSP_list Sent: 17 November 2012 06:32 To: cisco-nsp@puck.nether.net Subject: [c-nsp] vlan limit hit...but havent? Cisco 2960G - 255 vlans allowed, currently have 220 configured, but cant create any more? #sh vtp status VTP Version capable : 1 to 3 VTP version running : 1 VTP Domain Name : VTP Pruning Mode : Disabled VTP Traps Generation : Disabled Device ID : 0024.c3f0.9100 Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00 Feature VLAN: -------------- VTP Operating Mode : Transparent Maximum VLANs supported locally : 255 Number of existing VLANs : 220 Try and create new vlan: (config)#vlan 300 (config-vlan)#name test (config-vlan)#exi Proposed configuration exceeds the limit of 255 VLANs that can be supported on this platform. Reduce the number of VLANs proposed to be within this limit.APPLY VLAN changes failed. Anyone seen this before? (I've upgraded IOS to latest, but still have the issue?) _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/