Hi, Does anyone has any experience of running MSTP between SRX110 and Cisco (particularly Cisco2970)?
I have deployed a pair of SRX110 connected to a pair of Cisco2970, in a way that both the SRX100s are connected to both the Cisco2970 switches through trunk links. If I try to set the priority on one of the SRX110 to become root bridge, MSTP seems to be converged but there are huge packet losses in the network. I removed the priority and one of the cisco2970 became root and then everything seems to be fine. No packet loss after that. Just wondering why there is a problem if MSTP is converged and all devices seem to be agreeing on root bridge. Any experience or thoughts, please share. Regards, *Ali Sumsam CCIE* *Network Engineer - Level 3* eintellego Pty Ltd a...@eintellego.net ; www.eintellego.net Phone: 1300 753 383 ; Fax: (+612) 8572 9954 Cell +61 (0)410 603 531 facebook.com/eintellego PO Box 7726, Baulkham Hills, NSW 1755 Australia The Experts Who The Experts Call Juniper - Cisco – Brocade - IBM _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/