Hi, I have recently noticed that routers running OSPF connected to two different ports and communicating via EFP's configured on Cisco ME3600 can not form OSPF neighborship.
I cant see hello sent from other end while the unicast and broadcast does work as i can see the arp on both the ends and we have end to end pings. Does anyone has faced the same issue. I don't think its limitation. My configuration for the setup is as below TEST-RTR01 >>> PORT21- ME3600- PORT22 >> TEST-RTR2 Relevant configuration and code. interface GigabitEthernet0/21 description TEST-JUNIPER-2200 port-type nni switchport trunk allowed vlan none switchport mode trunk service instance 1 ethernet description ****OSPF-TEST**** encapsulation dot1q 80 bridge-domain 5050 ! end thn-me09#show run int gi0/22 Building configuration... Current configuration : 255 bytes ! interface GigabitEthernet0/22 description TEST-4200-1-0-22 port-type nni switchport trunk allowed vlan none switchport mode trunk service instance 1 ethernet description ****OSPF-TEST**** encapsulation dot1q 80 bridge-domain 5050 ! Cisco IOS Software, ME360x Software (ME360x-UNIVERSAL-M), Version 12.2(52)EY3, RELEASE SOFTWARE (fc1) Thanks in advance Hitesh _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/